SunSirs--China Commodity Data Group

Language

中文

日本語

한국어

русский

deutsch

français

español

Português

عربي

türk

Tiếng Việt

Sign In

Join Now

Contact Us

About SunSirs

Home > Rebar Seamless tube Steel Billet News > News Detail
Rebar Seamless tube Steel Billet News
SunSirs: "Production Cuts" Fail to Boost Profits; Steel Market Misses Out on Peak Season
October 09 2026 09:31:15()

The steel market did not see the arrival of a peak season during the final week of September.

The "Golden September" peak season of 2026 failed to deliver the anticipated surge in demand, with the market characterized by an intense tug-of-war between bullish and bearish forces. Ge Xin, Deputy Director of the Research Center at Lange Steel Information Research Center, made these remarks in an interview with Daily Economic News on September 28.

Data released by the National Bureau of Statistics on the morning of September 28 showed that from January to August 2026, the ferrous metal smelting and rolling industry generated operating revenue of RMB4.92886 trillion (down 1.1% year-on-year) and incurred operating costs of RMB 4.69938 trillion (down slightly by 0.4% year-on-year); total accumulated profits stood at RMB 29.43 billion , a year-on-year decline of 62.4%.

Industry profits fell by RMB 54.27 billion compared to the same period last year. Broken down to a per-tonne basis: the RMB 29.43 billion profit spread across a crude steel output of 652 million tonnes yields an average profit of just RMB 45 per tonne—a drop of RMB 5 from the previous month and a sharp decline from the approximately RMB 125 recorded during the same period last year.

The steel industry is mired in a reality where "production cuts" fail to translate into "profit growth." Brief monthly periods of profitability have not reversed the trend of drastic profit contraction across the sector. Caught between weakening demand and high costs, steel enterprises are facing a test of their resilience.

The 45-Yuan Calculation: Why "Production Cuts" Fail to Yield "Profit Growth"

The financial picture has grown increasingly bleak this year. The crux of the demand-side issue can be broken down into three key factors.

The first factor is the real estate sector. New construction starts remain sluggish, with "projects focused solely on housing delivery generating only limited steel consumption." While special-purpose bonds continue to be issued, there is a time lag in the flow of funds to construction sites, meaning the growth in infrastructure investment is insufficient to offset the shortfall in real estate.

Official data confirms this assessment. Data from the National Bureau of Statistics shows that from January to August, national fixed-asset investment (excluding rural households) totaled RMB 29.3092 trillion, a year-on-year decline of 7.2%. Within this figure, real estate development investment fell by 19.9% ​​to RMB 4.7979 trillion , and the floor area of ​​newly started housing projects dropped by 24.8% to 298.94 million square meters.

The second factor is funding. The increment in aggregate financing contracted year-on-year, and the actual deployment of funds was sluggish, "constraining the commencement and execution of engineering projects as well as the efficiency of payment collection."Throughout the second quarter, the rate of fund availability at sampled construction sites remained consistently low at 54.91%.

The third factor is inventory. Monitoring data indicates that as of the end of July 2026, social inventory of construction steel in the Beijing-Tianjin-Hebei region reached 1.2105 million tonnes—a sharp year-on-year increase of 63.7%. Of this, rebar accounted for 1.0575 million tonnes, marking a year-on-year rise of over 70%; this high inventory level absorbed the momentum for price rebounds, making it difficult to drive a sustained, significant rise in steel prices.

The demand side exhibits a divergent pattern, with steel demand from the manufacturing sector showing significantly greater resilience than that from the construction sector.

Data supports this assessment. Figures from the National Bureau of Statistics show that the value-added of industrial enterprises above designated size grew by 5.3% year-on-year from January to August; sectors such as shipbuilding, construction machinery, agricultural machinery, and home appliances bolstered demand for flat steel products, whereas the real estate slump dragged down consumption of long steel products. Monitoring by Information reveals that from January to July, demand for construction steel fell by 0.55%, while demand for industrial steel grew by 3.82%; the divergence in production structure during the same period was even more pronounced.

Production decisions mirrored these trends. Data from the China Iron and Steel Association (CISA) shows that in the first half of the year, output of long steel products totaled 235 million tonnes (down 5.3% year-on-year), while output of flat steel products (plates and strips) reached 407 million tonnes (up 0.7% year-on-year), raising their share of total output to 56.7%; rebar output stood at 87.82 million tonnes, a year-on-year decline of 10.7%, making it the product category with the sharpest drop. Zhao Minge, President of the China Iron and Steel Association (CISA), stated at the member conference on August 21 that the share of steel consumed by the construction industry has dropped to 48%, while the share used in manufacturing has risen to 52%. This structural shift continues a trend observed over recent years.

There is also a ceiling for flat steel products. Demand for industrial flat steel relies on orders from sectors such as automotive manufacturing, construction machinery, energy equipment, and shipbuilding, bolstered by exports; however, "overall weak overseas demand limits the upside potential for flat steel prices." According to CISA’s monthly report on steel product imports and exports, my country exported 54.874 million tonnes of steel in the first half of the year, a year-on-year decline of 5.6%. Meanwhile, steel billet exports surged by 62.8% year-on-year to 9.593 million tonnes, with the June volume alone hitting a record high of 2.839 million tonnes. The contrast between the popularity of semi-finished products and the decline in finished products suggests that the export-driven floor for the market is not particularly solid.

Reducing costs is also proving difficult. From January to August, operating costs in the ferrous metal smelting industry accounted for 95.3% of operating revenue—an increase of 0.7 percentage points year-on-year. The cost-to-profit ratio stood at just 0.63%, and the sales profit margin at 0.60%, representing year-on-year declines of 1.11 and 1.05 percentage points, respectively. As early as the end of May, JLC had predicted a tightening of coking coal supplies, anticipating that "the center of gravity for costs would likely shift upward."

Currently, forecasts from various institutions regarding the period following the "Golden September" peak season differ slightly. Back in May, JLC predicted that expectations for the traditional "Golden September" peak season were weak, noting a coexistence of an "even slower off-season" and a "lackluster peak season" during the third quarter. In contrast, an August analysis was relatively more optimistic, predicting that steel prices would remain "generally strong in September and October, before weakening slightly in November and December." How will the steel industry weather the winter after the National Day holiday?

After the traditional "Golden September" peak season failed to materialize as expected, forecasts suggest that while there may be a short-term rush to complete projects and restock following the National Day holiday, "market momentum will be limited." Entering October, demand patterns are diverging between the north and the south: temperatures in the north are dropping, civil engineering work is gradually winding down, and demand for long steel products is weakening seasonally, whereas construction activity in the south remains relatively steady.

Supply has contracted passively, with low profit margins forcing steel mills to step up maintenance and overhaul activities. Data from the National Bureau of Statistics shows that from January to August, national crude steel output stood at 652 million tonnes and pig iron at 563 million tonnes—both down 3.1% year-on-year—while finished steel output was 951 million tonnes, a decline of 1.7%. Crude steel output among key steel enterprises tracked by the China Iron and Steel Association (CISA) reached 536 million tonnes, down 3.5% year-on-year. Voluntary maintenance and production cuts have become the primary means of adjusting supply, while "administrative production limits have receded to a secondary role."

Based on the consensus of various institutions, the strategy for the steel industry to weather the winter generally focuses on three areas:

The first is self-discipline. At the "Mysteel" mid-year conference held on July 17, CISA Vice Chairman Xia Nong urged enterprises to continue aligning production schedules with downstream demand rather than relying on "price wars" for survival; meanwhile, Liu Biao, Deputy Director of the association's Market Research Department, emphasized the need to "uphold the bottom line of industry self-discipline" at a steel market seminar on September 19.

Jiang Wei—CISA Deputy Party Secretary, Vice Chairman, and Secretary-General—emphasized at the first-quarter briefing on April 29: "Safeguarding profitability remains the top priority; steel enterprises must maintain strategic resolve, practice the 'three-do's and three-don'ts' operational principles, and steadfastly adhere to self-discipline regarding production control and inventory reduction."

The second is structure. Regarding products, the focus aligns with the direction highlighted by Ge Xin: increasing the proportion of high-value-added products and optimizing the product mix have become "critical priorities for steel enterprises to break through their current predicament." The China Iron and Steel Association (CISA) notes that sectors such as integrated circuits, aerospace, the low-altitude economy, and new energy storage are generating rigid demand for high-end specialty steels.

A third factor is emerging demand. The acceleration of wind power, photovoltaic (PV), and energy storage projects continues to drive consumption of galvanized sheets, structural steel, and high-strength plates for wind turbine towers, PV mounting systems, and energy storage cabinets. As disclosed at the aforementioned member conference, the planned construction of "six major networks"—water infrastructure, modern power grids, computing power networks, next-generation communication networks, urban underground utility networks, and logistics networks—during the "15th Five-Year Plan" period is expected to involve investments exceeding 23 trillion yuan and generate demand for 261 million tons of steel. Xia Nong noted that my country is currently implementing the largest capacity renewal program in the history of the global steel industry, involving a total capacity of over 400 million tons.

Of course, risks remain. Three rolling lines in North China are scheduled to commence production in the fourth quarter, driving a net capacity increase of 18.95 million tons (a 5.09% rise) for the year; hot-rolled coil output is highly likely to remain at a high level. Meanwhile, The baseline for steel prices in the second half of the year may continue to trend downward compared to the first half; significant profit recovery will be difficult and will likely depend on supply-side consolidation.

It is advisable to view market trends rationally, avoid blind capacity expansion, adjust production pacing based on orders, and manage risks effectively. "In an environment where industry profit margins are constantly being squeezed, it is increasingly difficult to generate returns solely through output expansion." The ability to maintain strategic focus and hone product competitiveness will determine the quality of a company's future survival and development. (Source: Daily Economic News)

 

SunSirs has been continuously tracking price data for over 200 commodities for nearly 20 years, please contact support@sunsirs.com for subscription.

【Copyright Notice】In the spirit of openness and inclusiveness of the Internet, SunSirs welcomes all media and institutions to reprint and quote our original content. If reprinted, please mark the source SunSirs.

Exchange Rate:

8 Industries
Energy
Chemicals
Rubber & Plastics
Textile
Non-ferrous Metals
Steel
Building Materials
Agricultural & Sideline Products

© SunSirs All Rights Reserved. 浙B2-20080131-44

Please fill in the information carefully,the * is required.

User Name:

*

Email:

*

Password:

*

Reenter Password:

*

Phone Number:

First Name:

Last Name:

Company:

Address: